Oil Sump Pan

Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series

Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series

Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series
CUSTOM BUILT ALUMINUM BILLET RAIL WET SUMP OIL PAN. THIS ALUMINUM OIL PAN WAS ORIGINALLY DESIGNED & FIRST BUILT IN 1990. DESIGNED FOR: COMPETITION ELIMINATOR, SUPER STOCK , TOP DRAGSTER, SPORTSMAN AND BRACKET RACING. ALL CLASSES - DEMANDING MAXIMUM OIL CONTROL WITH SIGNIFICANT HORSE POWER GAINS PRODUCED BY A CUSTOM BUILT "TWEAKED OVER THE YEARS" OIL PAN. 090 3003 H14 ALUMINUM SHEET METAL AND 6061 3/8 ALUMINUM BILLET STOCK FOR SIDE RAILS AND FRONT / REAR PAN SEAL INSERTS.

STD GM 9 1/4 IN BOLT PATTERNS -- SPECIFY "STOCK" GM BOLT PATTERN. MARK 4 TYPE BLK WITH 2 PIECE REAR MAIN SEAL AND STD GM OIL PAN BOLT RAIL WIDTH OF 9 1/4 IN WITH OPTIONAL "RACE" OIL PAN BOLT HOLES AT MAIN CAP CENTER-LINES -- SPECIFY''DART'' -''BRODIX'' RACE BLOCK. DART BIG M SPORTSMAN, AND BRODIX ARE PRODUCED WITH BOTH STOCK GM & OPTIONAL "RACE" (M/CAP C/LINE) OIL PAN BOLT PATTERNS.

STARTER POCKET DESIGNED FOR MINI TYPE STARTER & 168 TOOTH FLYWHEEL. WORKS WITH ALL MOROSO CAST IRON AND ALUMINUM BILLET OIL PUMPS.

SPECIFY NR AT END OF PT # FOR STD GM BOLT PATTERN 9 1/4 IN NON-RACE. FOR SPREAD RAIL BLKS - 10 IN AND 10 1/4 IN WIDTH BOLT PATTERN, SPECIFY THE FOLLOWING. DEPTH : REAR SUMP 8 IN. DEPTH : FRONT SECTION 5 1/2 IN STD -- WITH 5 & 5 1/4 IN DEPTHS AVAIL. (4.750 STROKE & UNDER).

WIDTH: KICK OUT - PAN B0LT CENTER TO OUTSIDE WALL ON PASS SIDE - 2 IN. WIDTH; OVERALL - STD GM 9/14 IN BLOCKS -11 13/16 IN -- SPREAD RAIL BLOCKS 12-13/16 IN. CAPACITY : 7 QUARTS PLUS FILTER. MARK 4 TYPE BLK USES FEL PRO NOTCHED STROKER GASKET #1863. 750 BLOCKS USE STROKER GSKT #1816.

BOTTOM REAR PAN SUMP IS REINFORCED FOR THAT OCCASIONAL GROUND CONTACT. (MOST ALUM PANS TEAR APART HERE FROM REPEATED IMPACT) SUMP CAVITY IS BAFFLED TO CONTAIN & PREVENT OIL FROM RUNNING TO FRONT AND REAR OF PAN DURING ACCELERATION AND DE- ACCELERATION.

PERFORMANCE KICK OUT CONTROLS THE OIL AND PREVENTS IT FROM SPLASHING BACK ONTO THE CRANKSHAFT WHILE ADDING ADDITIONAL POWER. (25 HORSEPOWER ON 1000 HP ENGINES).

SUMP TRAP DOOR & CEILING BAFFLING IMPROVE OIL CONTROL DURING ACCELERATION & DECELERATION. LOUVERED WIND-AGE TRAYS AND MAIN CAP PARTITIONS.

EXCELLENT OIL CONTROL WITH SPECIALLY DESIGNED WET SUMP RESERVOIR. "RACE BOLT PATTERN'' STOCK GM WIDTH (9 1/4") USING STK 4 CORNERS & RELOCATING PAN STUDS TO CENTER OF # 2, 3 & 4 MAIN CAPS.

DART INCORPORATES BOTH BOLT PATTERNS INTO THEIR BIG M BBC BLOCKS. PRO BLKS USE DONOVAN BLT PATTERN SPREAD. STOCK GM & RACE BOLT PATTERN PAN WILL ACCEPT UP TO 4.850 STROKE USING ALUMINUM RODS.

SPREAD RAIL BLOCKS OIL PAN WILL ACCEPT UP TO 5.300 STROKE USING ALUMINUM RODS. PRO SERIES OIL PAN COST...................................

FOR MORE INFORMATION CALL : 317- 286 7171. The item "BB CHEVY ALUMINUM WET SUMP OIL PAN 20385-B/RL BILLET RAIL PRO SERIES" is in sale since Tuesday, August 16, 2016. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Engine & Components\Other". The seller is "performanceplus465" and is located in Avon, Indiana. This item can be shipped worldwide.

  • Brand: Custom Built
  • Manufacturer Part Number: 20370-20385


Bb Chevy Aluminum Wet Sump Oil Pan 20385-b/rl Billet Rail Pro Series